Most of the air conditioners released in recent years, regardless of their capacity, have the option to search for errors in Dantex air conditioners. The system can be started automatically or manually.
It can be manually started by specialists from the service center. Thanks to the diagnostic function, the master does not need to independently check all the components and circuits of the air conditioner. Each type of breakdown is coded by a certain set of Latin letters and numbers or diodes blinking in a certain order and gives out certain values. Most often, the error codes of air conditioners are displayed on the display of the indoor unit or remote control. But some models also have light indication on the external module of the system.
Self-diagnosis
The self-diagnosis option detects the problem and informs about it. Error codes are the sequence or alphanumeric combination that appears on the displays.
The most common causes of errors in Dantex air conditioners:
- Failure of the temperature sensor of the indoor module;
- Failure of the temperature sensor of the heat exchanger of the indoor module;
- Indoor unit fan motor malfunction;
- Burnout of the general board.
Error codes
Each manufacturer assigns specific error codes to their products. Moreover, as a rule, these "branded" icons do not change from model to model.
Error codes on the indoor unit display
| Error code | What does this code mean |
| E1 air conditioner error Dantex | EEPROM function abnormality |
| E2 | Zero Crossing Error Signal |
| E3 error of the Dantex air conditioner | The fan speed of the indoor unit is not controlled |
| E4 | The protection mode against overvoltage in the electrical network has been activated for the last 4 hours |
| E5 | No contact with the open temperature sensor control circuit |
| E6 | No contact with the evaporator temperature sensor control circuit |
Dantex air conditioners are manufactured in accordance with all existing international standards. Although the manufacturer is not yet very well known on the market, Dantex products are confidently winning over their consumers.
The main success of the products of this company is the combination of a system of the best developments of world-famous factories and their own innovations. The compressors built into Dantex equipment are assembled at the most famous factories in Japan: Hitachi, Matsushita, Toshiba.
Industrial air conditioners are equipped with Daikin compressors - the best that the modern air conditioning market can offer. Coming off the assembly line, air conditioners are thoroughly tested by special control services, excluding factory defects.
