Error indication lg air conditioners
Modern systems of the firm Lg, regulating the temperature regime in the premises, are structurally quite complex, the error of the lg air conditioner can lead to malfunctions, the elimination of which will be quite expensive. Therefore, all air conditioners are equipped with a self-diagnosis device that, in case of interruptions, can block the operation of the air conditioner and display the cause of the malfunction on the indoor unit.
Various possible errors of air conditioners lji are indicated by a specific blinking sequence of the LED. Every three seconds, the diode blinks from one to ten times, the number of blinks is the code that has a decoding in the instructions attached to the product.
For example, if the air conditioner shuts down and the diode blinks every three seconds for eight times, it is necessary to check the operation of the fan motor. Information about faults greatly simplifies the repair, and most importantly, it protects the entire system from serious damage that could occur if the air conditioner worked with malfunctions, which are signaled by error codes for air conditioners lji.
When the diagnostic device detects several malfunctions, the signaling occurs in the sequence of increasing sequence number. First, a malfunction is indicated with fewer flashes. After three seconds, the error codes of lg air conditioners with a higher serial number are signaled. Then the sequence is repeated.
The complete set of error codes can be found below.
Eliminating air conditioner error lji
It should be borne in mind that the diagnostic system is very sensitive and reacts to deviations of any parameters provided by the instructions.
Including changes in the characteristics of the power supply network, voltage surges can be recorded as an error of the lg air conditioner, therefore, before starting to troubleshoot the malfunction, measure the network readings and, if the indicators match, turn on the air conditioner again. If the failure was caused by the power supply voltage, then after such a simple procedure, work will resume, and the error codes of air conditioners will not be displayed.
A diagnostic device through an error code indicates a malfunction, which significantly reduces the cost of repairs, since there is no need to attract expensive devices and service center professionals to identify and eliminate a defect. To eliminate the detected error of air conditioners lji, the knowledge and experience of a wide range of specialists is sufficient.
