Air conditioners SAMSUNG are equipped with a developed self-diagnosis system, as a result of which the control system, when a certain malfunction is detected, blocks the operation of this unit, at the same time informing the user about the cause of the breakdown.
You can eliminate the errors of air conditioners using the appropriate instructions for decoding the faults.
Samsung air conditioner error - troubleshooting
Some models of this unit from Samsung are equipped with a text mode, to enter which you need to hold down the "Enable" button located on the internal block of this device for five seconds.
The air conditioner control system reports an error by flashing the LED on the panel of the indoor unit. When there is a specific error in Samsung air conditioners, the LEDs flash or light up in the specified sequence. If the control system of this unit has detected more than one fault, then the fault with the highest priority is initially indicated, and only then the rest.
Major error codes for Samsung air conditioners
As soon as the error of the samsung air conditioner is detected, it is displayed on the screen:
- EEPROM is an auxiliary memory error. It is displayed only for models that have a power outage resume function;
- Error in the meter of the temperature indicator of the indoor unit;
- If the speed does not exceed 450 rpm for 15-20 seconds, then an error code for the samsung air conditioner is issued, the decoding of which informs the user about a malfunction of the fan motor speed of the indoor unit;
- Error in the temperature meter of the heat exchanger of the indoor unit;
- If the function is installed or if the function fails, this result is displayed on the screen as the corresponding code.
The complete list of errors in Samsung air conditioners is as follows.
When testing the operation of this unit for faults, the cooling mode is activated with the following restrictions:
- Forced operation of the compressor in cooling mode in the absence of switching off / on, taking into account the temperature set inside. In this case, there is no defrosting mode;
- When the internal fan is rotating at high speed;
- Air flow up and down due to the blade operating modes.
Test mode requires entering a cooling mode that operates independently of the internal or set temperature.
Before installing such a unit, the user should read the operating instructions for this technique in detail. Air conditioner error codes also need to be studied and deciphered in detail.
