The main control of the air conditioner is carried out using the remote control. Next, we will answer the question of how to use the air conditioner remote control, whether it is possible to start the equipment without a remote control and what to do if it does not respond to commands (the signal is blocked).
How to use the air conditioner remote control
- automatic (AUTO);
- heating (HEAT);
- cooling (COOL);
- ventilation (FAN);
- sleep (SLEEP);
- dehumidification (DRY).
The choice of the mode is carried out by the Mode button.
When working with the remote control, the distance to the air conditioner body should be no more than 8 meters. The front panel of the indoor unit is not covered with curtains, boxes.
The signal is supplied by an infrared beam. Locating TVs or radios closer than 1 meter may disrupt its operation and the air conditioner will not respond to the remote control. The remote control should be protected from overheating, moisture and shock.
Control buttons
The remote controls have the following buttons to control the air conditioner:
- switching on and off (On / Off);
- mode selection (Mode);
- "-" and "+" with their help set the time and temperature;
- Blinds swing button (Swing);
- fan speed button (Fan);
- start timer (Timer);
- starting the "sleep" mode - (Sleep).
How to turn on the air conditioner with and without a remote control
- Apply power, press the On / Off button;
- set the appropriate operating mode (Mode button);
- set the comfortable temperature within the specified range using the “-” and “+” buttons;
- set the fan speed (Fan button).
If the remote control is lost, the question arises "how to turn on the air conditioner without the remote control?"
To do this, there are several control buttons on the front panel. One of them starts the air conditioner. But this way you can only enable automatic mode.
Before turning on the air conditioner without a remote control, try to change the batteries, wipe the LED on the remote control and the receiving window on the indoor unit body.
What to do if the air conditioner does not respond to the control panel
If the air conditioner does not turn on from the remote control, you need to:
- move aside all curtains and other obstacles that interfere with the signal transmission;
- turn off the TV and radio, if they are in the room;
- replace the remote control batteries.
If the air conditioner does not respond to control through the remote control after all the above procedures, you should contact a repair shop.
It can be started using the AUTO button on the case.
To prevent malfunctions, use the air conditioner remote control as recommended in the instructions.
