Content
How to install the air conditioner correctly
You can purchase the air conditioner from the installer. But what if the device was bought from hands? Can I install the air conditioner myself?
How to install a vent air conditioner
Installation do it yourself air conditioner not difficult, but you need to know some of the nuances:
- The entire external part of the equipment, covered with thin plates such as blinds, should be outside and not covered by anything;
- It is advisable to order windows with vents below in advance. The size of the vents is exactly the same for the air conditioner. For the summer, they are removed and an air conditioner is inserted. The slots around are closed with adhesive tape;
- Before installing the air conditioner with your own hands, you should carefully study the instructions. There are models that should be installed with a slight slope towards the street;
- A water drainage tube is attached to the drainage system.
How to install a split air conditioning system
Before you install the air conditioner yourself, you need to carefully read the instructions:
- Let's deal with the wiring first. It is advisable to connect the device to an outlet that is not used in any way. With the help of the control, the phase is determined, and the wires are connected, the machine is connected. The wire is pulled along the wall to the place of the future location of the air conditioner. How to install the air conditioner correctly can be found in the manual.
- It is necessary to make four holes in diameter that match the electrical cable and three pipes connecting the outdoor and indoor units.
- To hang the outdoor unit, you should stock up on large dowels, a puncher, a level and special corners for fasteners. Do-it-yourself installation of the air conditioner is carried out horizontally level. The instructions specify the distance from the wall.
- The inner part is hung using the same dowels present in the holder and punch kit. Be sure to check the level and take into account the distance to the wall! You should decide for yourself whether you can install the air conditioner yourself, you should only after studying the instructions.
- A drain tube is attached, which is led out through one of the holes in the wall, connected to a drain tube from the outer compartment.
- Electric wires are connected using special clamps (strips).
The instruction on how to properly install the air conditioner is not difficult, but now there are works that cannot be carried out independently without special equipment: fastening copper pipes for the coolant, pumping out air and pumping in the cooler, test run.
