How the motion sensor toilet light works

An unexpected power outage is an unpleasant phenomenon that often happens due to breakdowns on the line, adverse weather conditions. However, modern gadgets make life easier. Toilet light with motion sensor is a small comfort enhancement.

Description of the device

The backlights are equipped with a motion and light sensor

The backlight for a toilet bowl with a motion sensor contains a battery enclosed in a plastic box and an LED strip connected to it. In addition, an ambient light sensor is included in the circuit. You can control the device using the buttons on the case.

The device is attached to the rim of the toilet bowl. It is distinguished by its laconic design, providing additional comfort in the washroom. For ease of use, the device is equipped with a motion sensor. A person does not need to turn on the light in the toilet at night, as the light works automatically.

Most backlights have the ability to change colors. Some of them are capable of producing ultraviolet rays. The sensors work without any failures for a long time.

Specifications

Micro-finger batteries are used to power the device. The device itself has the following characteristics:

  • voltage: about 4.5V;
  • power: 0.1 W;
  • weight: 42 g;
  • lighting source: LED.

The device provides 8 backlight colors. Automatic shutdown of the device occurs within 2-3 minutes. This indicator can be adjusted if necessary.

The need for backlighting and how it works

The built-in motion sensor allows you not to turn on the lighting at night. A feature of the device is the ability to disperse the antibacterial composition in the room thanks to ultraviolet rays. The device does not irritate the eyes with bright light at night.

The system works in automatic mode. Can combat unpleasant odors without the use of chemicals.

The principle of operation of the device is simple: if the illumination level drops to the value set by the program, and the person is at a distance of no more than 3 m from the toilet, the backlight turns on. This function is not used during daytime. The light sensor is responsible for blocking it.

Advantages and Disadvantages of Motion Sensor Toilet Lights

Ultraviolet rays kill bacteria

LED lighting for toilets appeared relatively recently, but has already managed to attract the attention of users. You can buy it in hardware stores and online.

Advantages of the device:

  • the ability to work autonomously - the battery charge is consumed slowly;
  • suitable for use in any room or outdoor booth;
  • simple design for intuitive easy operation and setup;
  • selection of lighting modes and its shade - you can run a program that will change color every 15 seconds;
  • reduction in energy costs;
  • full automation of the process - a person in the dark does not have to look for a button to turn on the device;
  • soft emission of light - it does not blind a person, does not irritate the eyes;
  • stability of functionality;
  • low cost.
Correct mounting is possible with standard rim sizes

Despite the abundance of positive qualities, the device also has disadvantages.

  • Installation features are determined by the width of the rim of the plumbing fixture. If the toilet has non-standard dimensions, fixing the backlight is difficult.
  • The lighting wires are located under the toilet seat, so there is a risk of mechanical damage.
  • Devices that are equipped with additional functions are expensive.

If you follow the instructions for use, the product will serve for a long time.

You should not buy batteries that are too cheap, as they will have to be changed frequently.

Popular toilet lamp manufacturers

The bulk of toilet seat lights are manufactured in Southeast Asia. The most popular manufacturer is considered to be Glowbowl. He makes the most reliable device models. Analogs of the device are cheaper, although the duration of their operation may be shorter. The following product models are considered popular:

  • Lightbowl LED. The device fits well into the interior. Used in cases where lighting is limited or power outages are frequent. Thanks to the presence of a motion sensor, the backlight turns on only at the right time at night. The LED will stay on for 2 minutes. The device is universal. The sensitivity of the motion sensor is 2 m.
  • IllumiBowl. This backlight has standard specifications. Fastened with a flexible metal handle to any type of base. The shades in this device slowly change every 4 seconds.

The motion sensor toilet light is a relatively new device that makes life more comfortable and convenient. It does its job well despite the frequency of use.

myhome.decorexpro.com/en/
Add a comment

Foundation

Ventilation

Heating