It is better to start planning the water heating of a wooden house at the construction stage.
Calculations of hot water heating
Why are the calculations carried out:
- In order for the coolant to reach the farthest rooms, this is especially true for water heating of two-story houses;
- So that heating is carried out constantly;
- To reduce fuel costs.
A heating engineer will help to calculate the scheme of water heating of a country house. The diameter of the heating main, its duration, the power of the boilers and their number will be calculated.
Features of heating tracing
The peculiarity of tracing during the installation of water heating of a wooden house is that it will not work to hide the pipes in the walls. They will be visible along the skirting boards. If the route is laid before the floor is laid, it can be hidden under the floor. This also provides some cost savings.
A two-pipe hot water heating system for residential buildings is more preferable, it is used very widely and really gives good results. With this arrangement, the batteries are independent of each other. The water heating device at home is such that any battery can be disconnected or dismantled, the rest will work normally. This advantage can be used when installing additional valves or renovating hot water heating for residential buildings.
Water circulation system
The natural circulation system provides for the slope of pipes that run through all rooms, under the ceiling, against the walls. When installing water heating in a one-story house, such a system can still be used. But when installing water heating in a two-story house, it will be very difficult to calculate the slope of the pipes. Therefore, when planning water heating for a country house, it is best to deal with forced circulation. It is carried out using a circular pump. The main disadvantage is that if there is a power outage, the water in the pipes will stop. But this problem is relevant only for owners of solid fuel boilers. If water heating of a country house will be carried out using gas or electricity, feel free to install the pump.
The choice of material for the heating mains of water heating
The heating main for water heating of a residential building is best laid out of polypropylene:
- Welding of metal structures is not required;
- No additional couplings are needed, as with metal-plastic;
- With the help of a special soldering iron, sealed joints are made;
- The price is affordable;
- Installation is quick.
You need to choose a pipe specifically for a water heating device at home.
